Question - 1
Which I/O port belongs to LPT2?
Answer- B
Question - 2
Which device is on IRQ 6?
- Keyboard
- IDE
- Floppy drive
- None of the above
Solutions
Answer- C
Question - 3
The 34-pin connection on an I/O card is for?
- Floppy drive
- SCSI drive
- IDE drive
- Zip drive
Solutions
Answer- A
Question - 4
What type of FRU is a SCSI host adapter?
- CPU
- I/O card
- Video card
- Hard drive
Solutions
Answer- B
Question - 5
In inkjet technology the droplets of ink are deflected by?
- Electrically Charge Plate
- High pressure jets
- Multi directional nozzle
- None of the above
Solutions
Answer- A
Question - 6
Which component stores an electrical charge?
- Diode
- Rectifier
- Capacitor
- Resistor
Solutions
Answer- C
Question - 7
What do you need to check serial and parallel port?
- Port adapter
- Logic probe
- Loopback plug
- none of the above
Solutions
Answer- C
Question - 8
What is full name of AMD?
- Advanced Micro Devices
- Automated Micro Devices
- Advanced Mini Devices
- None of these
Solutions
Answer- A
Question - 9
Which is the processor suitable from intel family of processors for Server and Workstation?
- intel Xeon
- Intel 4040
- MCS-4
- Intel 4004
Solutions
Answer- A
Question - 10
How many tracts and sectors found in a normal floppy dick?
- 80 tracks and 18 sectors.
- 18 tracks and 80 sectors.
- 8 tracks and 18 sectors.
- 80 tracks and 8 sectors.
Solutions
Answer- A
Question - 11
To find out how much memory is available, you could type _________
Answer- B
Question - 12
Topically, how many type III PC cards can you insert in a laptop
Answer- A
Question - 13
Which is the easiest component to environmentally recycle?
- Motherboards
- CMOS batteries
- Toner cartridges
- Cathode ray tubes
Solutions
Answer- C
Question - 14
Which values are held in CMOS for the hard drive?
- Size (heads, cylinders, sectors)
- IRQ
- Free space
- Virus alert
Solutions
Answer- A
Question - 15
How does a parallel port communicate information to a peripheral device?
- One bit at a time
- 8 bytes at a time
- One byte at a time
- 256 bytes at a time
Solutions
Answer- C
Question - 16
RS-232 is a standard that applies to?
- Parallel port
- Serial port
- Combine Port
- Game Post
Solutions
Answer- B
Question - 17
Which part of the laser printer should NOT be exposed to sunlight?
- Transfer corona assembly
- PC drum
- Primary corona wire
- Toner cartridge
Solutions
Answer- B
Question - 18
The ATAPI compliance is stands for?
- CDROM
- Bus mastering
- Mass storage device
- None of the above
Solutions
Answer- C
Question - 19
What does the acronym RTS represent?
- Required to save
- Ready to start
- Request to send
- Right to separate
Solutions
Answer- C
Question - 20
What is the best ground for a conductive work bench?
- AC outlet
- Ground to bend
- To another device
- Chassis ground
Solutions
Answer- A
Practice more set questions